AT&T 964 - Manual (Page 27)

ANSWERING SYSTEM
(D-TAD) Operation
51
CALLER ID OPERATION
50
Begin message
playback
Skip to next
message
Lit when in
D-TAD mode;
flashes when
there are new
messages
Repeat a
message or
messages
Stop message
playback
Remove
announcement
or message
Enter
D-TAD mode
Use with 7 to access
outgoing announcement
Use with
o to access
outgoing
announcement
Use with + to play
all messages
Lit when
answering
function is on
Turn
answering
function
on or off
Record a new
announcement or
a conversation
Record
a memo
Time/Date
If you subscribe to Caller ID service, this phone automatically resets the
time and date each time new information is received. You can set the time
and date yourself if you wish. (See “Set the Time/Date” in the SET UP
SYSTEM FEATURES section of this manual.)
Reset COVM Indicator
This feature is useful in case you get a false COVM signal from the Central
Office. If a COVM indicator lights when there are no messages on that line,
clear the indicators.
1 Press G.
2 Press - until the screen displays COVM RESET, then press >.
3 Press - or + until the screen displays the desired line number,
then press >. The screen displays:
4 Press X to reset. The screen displays RESET!.
5 Repeat Steps 1-4 to reset the COVM for additional lines.