Argus Camera DC2700 - Manual (Page 8)

Argus DC2700 Camera User Manual
Page 8 of 28
Note: While in TV mode, Cyber Display may turn off.
2.4 Recording a Still Picture
While in the Live Viewfinder Mode, if you momentarily press the Shutter Release Button
you will capture a single Still image. After the image is captured, a Freeze Frame
presentation of the captured image will appear in the Viewfinder. This Freeze Frame
accurately represents the image that you have captured and therefore gives you the ability to
decide immediately if another shot is required.
Still images are stored in .JPG format in your camera.
At this point, pressing the
Shutter Release Button again will return you to the Live
Viewfinder, and more Still Pictures can be taken.
After the first picture in a sequence, you may immediately return to the Live Viewfinder and
take a second picture. However, after the second in a series of pictures is taken, attempting
again to return to the Live Viewfinder may result in displaying a BUSY message. This
indicates that the camera has no more Scratch Memory for image capture. After
approximately 4 seconds, the camera will return to Live Viewfinder mode automatically.