Wildgame Innovations XA-timer - Manual (Page 3)

Programming
Setting Time:
1.Press the Set button one time to select the hour.
2.Next, press the + or – buttons to change to the
desired hour.
3.Once the hour is selected press the Set button to
choose the minutes and repeat step 2 to select the
desired minute. New Timer
Installation (cont.)
Connect to Battery:
1.The XA timer is designed to be ran by a 6 volt battery.
We recommend a rechargeable type 6 volt battery.
2.Start by installing the Red wire from the timer unit to
the Positive battery terminal.
3.Next, install the Black wire from the timer unit to the
Negative battery terminal.
PM
Hr Min Run Time