Edgecraft Chef's Choice 310 - Manual (Page 8)

8
poCket and fIllet knIveS
The Model 310 is an excellent sharpener for your favorite pocket or fillet knives. It will put the
same incredibly sharp edges on the entire length of these blades from the tip to the bolster.
The Model 310 Sharpener is not designed for large and heavy hunting knives. For these
types of knives we recommend the Chef’sChoice
® Professional 110 Heavy Duty Model or the
Chef’sChoice ® EdgeSelect ® Model 120.
normal maIntenanCe
NO lubrication is required for any moving parts, motor, bearing surfaces or sharpening surfaces.
Your sharpener may be cleaned by carefully wiping with a damp cloth. Do not use detergents
or abrasives.
ServICe
In the event post-warranty service is needed, return your sharpener to your local retailer or
national distributor where the cost of repair can be estimated before the repair is undertaken.
Please include your return address, daytime telephone number and a brief description of the
problem or damage on a separate sheet inside the box. Retain a shipping receipt as evidence of
shipment and as your protection against loss in shipment.
Assembled in the U.S.A. www.chefschoice.com
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the product.
Chef’sChoice
® , EdgeCraft ® , Diamond Hone ® and the overall design of this product are registered trademarks of
EdgeCraft Corporation, Avondale, PA.
Conforms to UL Std. 982 Certified to CAN/CSA Std. C22.2 No. 64
Certified to EN 60335-1, EN 60335-2, EN 55014-1+A1, EN 61000-3-2, EN 61000-3-3
© EdgeCraft Corporation 2013 Printed in China.
B13 C1482Z1
®
EdgeCraft Corporation
825 Southwood Road, Avondale, PA 19311 U.S.A.
Customer Service (800) 342-3255 or 610-268-0500