Nyrius ARIES Home - Manual (Page 9)

9
INFO KEY (REMOTE CONTROL)
EXAMPLE:
HDMI1(Input Displayed) CH1(Wireless Channel) 1280x1024 (Resolution) = OFF
IR KEY
IR blaster frequency default setting is 47KHz
Press once for current IR frequency status display. Press multiple times to cycle between three
frequencies.
The OSD shows: (Display 5secs)
HDMI1 CH1 1280x1024 = 47KHz
Press IR key again to switch IR blaster frequency.
- The OSD shows: (Display 5secs)
HDMI1 CH1 1280x1024 = 56KHz
OSD (On Screen Display) Description
Mode Status Description OSD Display (on RX)
Rx: Standby
Tx: Active-Standby
Solid RED
Power saving mode. ON
Pairing RX searching for unpaired TX Please Activate Registration
on Transmitter Unit
Pairing RX cannot find new TX New WHDI source was
not found
Pairing manually pairing RX and TX Adding NAVS502/NAVS500
Waiting for Signal Link After 80 seconds, can’t es-
tablish link on any channel.
Linked Mode
No input from selected
source
Video format not recognized
Video format is recognized N/A (Audio/Video will dis-
play)