Glastender Vertical Door Coolers - Manual (Page 9)

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com 8
stiffener
skin
top plate
c
ooler
D
esign
c
hange
i
MPortant
D
esign
c
hange
i
nforMation
In February 2004, Glastender released new BB and ND self contained cooler designs with the evaporator hous-
ing moved into an area above the compressor compartment. The serial numbers for these units will be 90000 and
above. As of September 2006, KC52, KC72, and KC84 model keg coolers are being manufactured as endwall
models. Due to special customer request some BB and ND self contained models may not have the endwall
design. Please be sure to verify which cooler design type you are ordering parts for. The term endwall will be
used throughout this document to denote parts used for coolers featuring this design.
Standard cooler configuration with evaporator inside cooler area. Compressor compartment
may be located left or right.
Endwall cooler configuration (most BB and ND models manufactured after Feb. 2004, most
KC models manufactured after Sept. 2006) with evaporator located in housing above the
compressor compartment. Compressor compartment may be located left or right.