Artdio usb 3d sound configuration settings – ArtDio SS-200 User Manual
Page 9

17
16
[1] MAIN SETTING
[2] MIXER
ARTDIO USB 3D SOUND CONFIGURATION SETTINGS
Audio Settings
Vol “ ”: Use the Volume Control to increase or decrease the volume, drag
the Balance slider to change the balance between left and right speakers.
Rec “ ”: Use the Volume Control to adjust the recording volume.
Output Device
Analog Output
ǺSelect the appropriate audio output device, such as
Headphone “ ” and Speaker “ ”.
S/PDIF Output
ǺSelect S/PDIF for digital audio output settings.
Audio Jack
ǺAudio output jack “ ” (green) for speaker, and audio input
jack “ ” (red) for microphone.
DSP (Digital Sound Processing) Mode
ǺUse the settings below to change
the DSP mode.
1)Click on 7.1 Virtual Speaker Shifter button
2)Select to change the 7.1 virtual speaker system settings.
3)Use the Volume Control to adjust the volume.
4)Click on “ ” to test the 7.1 virtual speaker settings, or “ ” to stop.