Minka Group F648-SWH - Manual (Page 18)

Fig. 19
Step 5. Install 2 x 13W GU24 compact fluorescent bulbs (included).
Step 6. Remove the finial, glass cap, nut, metal washer and rubber washer from the light kit. Raise
the glass shade up against the light kit stem, Place the rubber washer, metal washer and nut
over the stem and turn the nut clockwise until it locks up against the glass shade. Do not
Do not
overtighten. overtighten. (Fig. 19)
Step 7. Raise the glass cap and final against the glass shade and secure it to the stem by turning the
final clockwise until snug. Do not overtighten. Do not overtighten. (Fig. 19) Note: Note: Make sure to leave enough
space between the fan pull chain and the bulbs so the chain doesn't rub against any of the
bulbs.
BULBS
LIGHT KIT
GLASS
SHADE
RUBBER WASHER
METAL WASHER
NUT
FINIAL
GLASS CAP
PULL CHAIN