Minka Group F853-WH User Manual
Page 22
SYMPTOM
Frequency interference
SOLUTION
1.Turn the power off to your ceiling fan.
2.Please use a small size tool to change the frequency setting on the control system.
3.Return power to the unit Note: After the AC power is on,do not press any other
button on the transmitter before pressing the “Stop” button, doing so will cause the
procedure to fail.
4.Within 180 seconds of turning the Fan’s AC power ON.Press the transmitter’s Stop”
button for 5 seconds.
5.Once the receiver has detected the frequency, the fan will automatically begin to
operate and start to rotate in the counter-clockwise direction and on the lowest
Speed setting. The fan will continue to spin until the "STOP" button has been pressed.
6.The receiver has now learn the frequency which has been selected on the transmitter.
After completing the steps above, you should be able to operate the ceiling fan and
light. If the fan is not responding to the transmitter, please turn the power off to
the receiver, and repeat the process.