Minka Group F853-WH - Manual (Page 18)

3
4
within 3 Minutes of turning the fans
AC power on.
the lowest Speed setting. The fan will continue
to spin until the "STOP" button has been pressed.
The DC motor has a built in
safety against obstruction during operation, if the
fan motor senses a obstruction it will get locked
and will not rotate until the power has been
disconnected for 10 seconds.
The "D" that appears on the back of the remote
control next to the frequency dip switches is used
when using candeladra bulbs only. Leaving the dip
switch in the "D" setting will allow for dimming
capability. In the "ON" position it will disable the
Dimming function.