Minka Group F588-SP-BN - Manual (Page 17)

8
Fig. 16
Fig. 17
THE FOLLOWING OPERATION MUST BE ACCOMPLISHED
BEFORE INSTALLING THE LIGHT KIT.
Caution: Remove 5 rubber packing mounts and discard before
installation.
Step 1. Attach the fan blade to the blade holder using the
screws and fiber washers provided. Tighten screws securely.
Repeat process for remaining blades.(Fig. 16)
Step 2. Rotate the motor so that the screw holes in motor are
aligned with the holes in blade holder and secure with proper
screws. Repeat process for the other blade holders. (Fig. 17)
BLADE INSTALLATION
BLADE HOLDER
SCREWS
FIBER
WASHERS
BLADE
BLADE HOLDER
BLADE HOLDER
SCREWS