Minka Group F563-SP-BS/DW - Manual (Page 22)

SYMPTOM
Lights shut off and will not come back on.
This unit is equipped with a wattage limiting device. Lamping in excess of 190
watts will disable your ceiling fan’s light kit. To reset your light kit you must
turn the power off and re lamp, keeping the wattage under 190 watts. Restore
power to your ceiling fan and continue normal operation.
SOLUTION
SYMPTOM
Fan Wobble
SOLUTION
Check that all blade and blade holder screws are secured.
Use the enclosed blade balancing kit if blade wobble is
excessive. (See instructions included with the balancing kit.)
NOTE: All Blade sets are grouped by weight. Because blades vary
in density, the fan may wobble even though blades are weight
matched.