Minka Group F647-ORB - Manual (Page 15)

7
ATTACHING THE FAN BLADES
Step 1. Attach the fan blades to the blade holders
using the screws and fiber washers provided,
tighten screws securely. (Fig. 15)
Step 2. Remove rubber stops from motor. Align
motor holes to blade holders and secure with
screws provided, tighten screws securely. (Fig. 16)
NOTE: NOTE: You have the option of installing either five
or four blades. If you are using four blades, mount
blade holder to the inner screw holes of motor. If
you are using five blades, mount blade holder to
the outer screw holes of motor. (Fig. 16)
Fig 15
Fig 16
INNER
SCREW
HOLES
OUTER
SCREW
HOLES
FAN BLADE
BLADES HOLDER
SCREWS
FIBER
WASHERS