Minka Group F544-BCW - Manual (Page 9)

HANGING THE FAN
3
Fig.1
OUTLET
BOX
GROUND
WIRE
WASHER
LOCK WASHER
SCREW
MOUNTING
BRACKET
MOUNTING BRACKET
SCREW
SCREW
MOTOR
Fig.2
REMEMBER to turn off the power. Follow the steps below to
hang your fan properly;
Step 1. Attach the mounting bracket to the outlet box with 2
screws and washers provided. Make sure the bracket is tight
and secured (Fig. 1)
Step 2. Insert the bracket from the motor into the slot of the
mounting bracket and install the bracket with 4 screws
provided. Make sure the bracket is tight and secured (Figs. 2
and 3).
WARNING: All of the parts, hardware and components have been
provided for your safety and the proper installation of your new
ceiling fan. The use of other parts, hardware or components not
supplied by Minka Aire with the fan will void the Minka Aire
Warranty.
Tools Required: Phillips screw driver; slotted screw driver; step-
ladder; wire cutters; electrical tape.