Minka Group F888-WHF - Manual (Page 17)

9
Fig. 17
ATTENTION: The Energy Policy Act of 2005 requires this fan to be
equipped with a 190 watt limiting device. If lamping exceeds 190
watts, the ceiling fan's light kit will shut off automatically.
Step 1. Install 1x18 Watt GU24(MLS18GUWW) compact fluorescent
bulb (included). Note: This fan and bulb is not designed to dim.
Step 2. Raise glass shade up against bottom of fan housing and secure
it to the fan by turning the glass shade clockwise until snug. DO NOT
OVERTIGHTEN. (Fig. 17)
NOTE: The metal light cover included with your fan is an option to
replace the glass for the light in the event that you prefer not to use
the light feature of your fan. The metal light cover is not necessary for
the light operation; it can be saved for later use if desired. (Fig. 18)
INSTALLING THE LIGHT BULB & GLASS SHADE
GLASS SHADE
BULB
600-1
(PL019)
PL-190C
Fig. 18
METAL
LIGHT
COVER
600-1
(PL019)