Minka Group F711-DRB - Manual (Page 17)

10
Fig. 12
WARNING: Shut of the power supply before removing or replacing lamp. In handling of
halogen bulb, care should be taken not to touch it with your bare hands. Oil residue will
shorten the life of the halogen bulb. If you accidentally come into contact, wipe thoroughly
with a clean, lint-free, cotton cloth. Allow the bulb to cool off for 10 minutes before changing
the bulb. Use light bulb in accordance with the fan's specification. TO REDUCE THE RISK OF
FIRE DO NOT EXCEED MAXIMUM WATTAGE RATING.
1. Install 2x50W halogen bulbs (included) into bulb sockets. (Fig. 12)
2. Remove the glass cap and decorative nut from the light kit. Raise the glass shade up against
the light kit, place the glass cap and decorative nut against the glass shade and secure it to
the stem by turning the decorative nut clockwise until snug. Do not overtighten. (Fig. 12)
INSTALLING THE LIGHT BULBS & GLASS SHADE
50 W
HALOGEN
BULBS
GLASS SHADE
DECORATIVE NUT
GLASS CAP
LIGHT KIT