Minka Group F711-DRB - Manual (Page 16)

9
Fig. 11
NOTE: Before starting installation, disconnect the power by turning off the circuit breaker or
removing the fuse at fuse box.
1. Raise and hold the light kit close to the mounting plate and proceed to do the wire connections.
Connect the white wire connectors from the light kit and fan, follow the same procedure with the
black wire connector from the fan and the black wire connector from the light kit. (Fig. 11)
2. Carefully tuck all wire connections back into the light kit, then install the light kit onto the
mounting plate with 3 screws provided. Be sure to tighten all screws. (Fig. 11)
INSTALLING THE LIGHT KIT
LIGHT
KIT
MOUNTING
PLATE
SCREWS
CONNECTORS