Minka Group F566-WH - Manual (Page 5)

1. DISCONNECT ELECTRICITY to the existing
fixture occupying the space where you would like to
install the fan. After removing the old fixture, check
the mounting and stability of the ceiling outlet box.
If the outlet box is secure, then precede with the
installation procedure. If not, reinforce the outlet box
for strength and safety, and then proceed.
2. ATTACH THE MOUNTING BRACKET to
the outlet box with to screws and washers provided,
making sure the bracket is tight and secure.
3. LIFT FAN INTO POSITION by hanging the
motor assembly onto the hook of the ceiling
mounting bracket allowing it to hang freely.
4. MAKE THE ELECTRICAL CONNECTIONS
by connecting the black and blue wire from the fan
to the black wire in the outlet box. Then, connect
the white wire from the fan to the white wire from
the outlet box. Last, connect the green wire from
downrod to the green or ground wire from outlet
box.
NOTE: This procedure is for hanging the fan only.
For fans equipped with wall controls or lights kits,
please refer to insert "A"
5. MOVE FAN INTO POSITION over the four
mounting studs and secure with the provided
washers and nuts
6. INSTALL THE DECORATIVE HOUISNG
over the motor assembly and secure with the four
mounting screws.
1
2
3
6
4 (See Insert"A")
F
LUSH
M
OUNT
C
EILING
F
AN
I
NSTALLATION