Minka Group F823-SL - Manual (Page 16)

6
Step 1. Slide the canopy up towards the hanger bracket and place the key hole on the canopy
over the screw on the hanger bracket, turn canopy until it locks in place at the narrow section of
the key holes. (Fig. 15)
Step 2. Align the circular hole on canopy with the remaining hole on the hanger bracket, secure
by tightening the two set screws.
Note: Note: Adjust the canopy screws as necessary until the canopy and canopy cover are snug.
FINISHING THE INSTALLATION
Fig. 15
OUTLET BOX
HANGER
BRACKET
SCREW
SCREW
CANOPY
CANOPY
BOTTOM
COVER