Team Associated ProRally - Manual (Page 5)

5
:: Quick Start Guide
:: Quick Start Guide - (cont.)
:: Quick Start Guide - (cont.)
Battery Charging Steps and Safety:
NiMH Wall Charger: (Part #29154 -
Wall Charger AC 120V 350MaH)
NiMH Quick Charger: (Part #610 -
Reedy 447-S AC/DC 4-7 Cell Peak Prediction
NiMH/NiCd Charger)
Remove the battery from the vehicle before
charging. Be sure to select the correct
charging mode for the type of battery you
are charging.
NEVER leave the battery unattended while
charging!
NiMH: NiMH batteries (nickel-metal hydride)
are high current rechargeable batteries.
If you use a peak detection charger, make sure
it is designed for NiMH batteries!
Battery Installation:
1. Install the battery with the battery wires
directed towards the rear of the vehicle.
2. Insert the tabs of the battery strap into
the battery wall.
3. Slide the opposite side of the battery
strap onto the battery post and secure
with a body clip.
You may move the foam pad to either the
front or the rear of the battery compartment
to adjust the weight balance of the vehicle.
1
2 3
Wall Charger Peak Detection
Quick Charger