Maintenance & servicing, Warranty, Technical specification – Dynalab SC6/120V/60 User Manual
Page 6

4
Maintenance & Servicing
WARNING: Ensure the unit is 
disconnected from the mains electricity 
supply before attempting maintenance or 
servicing.
Periodically clean the instrument using a damp 
cloth and mild detergent solution. Do not use 
harsh or abrasive cleaning agents.
Any repairs or replacement of parts MUST be 
undertaken by suitably qualified personnel.
Spares and Accessories
The following spares and accessories are available 
from your laboratory dealer:
Description
Catalogue
Number
x1.7 magnifier
SC6/1
x3 magnifier
SC6/1/3
Wolffhuegel graticule 
& segmentation disk (pack of 10) 
SC6/2
Centering adapter (pack of 2)
SC6/3
Clear protective discs (pack of 5)
SC6/4
Receiver plate
SC6/5
Printer
SMP30/1
 
For a comprehensive list of parts required by 
service engineers conducting internal repairs, 
please contact the Sales Department at Bibby 
Scientific Ltd quoting both the model and serial 
number.
Only spare parts supplied or specified by 
Bibby Scientific Ltd. or its agents should be 
used. Fitting of non-approved parts may 
affect the performance and safety features 
designed into the instrument.
If in any doubt, please contact the Technical 
Service Department of Bibby Scientific Ltd. or the 
point of sale.
Bibby Scientific Ltd. 
Stone, Staffordshire ST15 0SA 
United Kingdom
Tel: +44 (0)1785 812121 
Fax: +44 (0)1785 813748 
e-mail [email protected]
www.bibby-scientific.com
Warranty
Bibby Scientific Ltd warrants this instrument to be 
free from defects in material and workmanship, 
when used under normal laboratory conditions, 
for a period of three (3) years. In the event of a 
justified claim, Bibby Scientific will replace any 
defective component or replace the unit free of 
charge. 
This warranty does NOT apply if damage is 
caused by fire, accident, misuse, neglect, 
incorrect adjustment or repair, damage caused by 
installation, adaptation, modification, fitting of 
non-approved parts or repair by unauthorized 
personnel. 
Technical Specification
Digital display 3 digit
LED
Light source
White LED
Count
0 to 999
Dish size up to
90 mm
Dimensions (w x d x h) 310 x 300 x 140 mm 
Net weight 
1.5Kg
