Dynalab SC6/120V/60 - Manual (Page 2)

English
Figure 3: Underneath the SC6 Plus
Thank you for purchasing this piece of Bibby
Scientific equipment. To get the best
performance from the equipment, and for
your own safety, please read these
instructions carefully before use.
This equipment is designed to operate under the
following conditions:-
❖
For indoor use only
❖ Use in a well ventilated area
❖ Ambient temperature range +5°C to +40°C
❖ Altitude to 2000m
❖ Relative humidity not exceeding 80%
❖ Mains supply fluctuation not exceeding 10%
❖ Overvoltage category II IEC60364-4-443
❖ Pollution degree 2 IEC664
If the equipment is not used in the manner
described in this manual the protection provided
by the equipment may be impaired.
Background
adjustment
Dish adapters
ave
save
averag e
reset
print
correc t
Figure 1: SC6 Plus controls
Control panel
Receiver
plate
Magnifier position
Sensitivity
adjustment
Figure 2: SC6 Plus back panel
PC
connector
(USB)
Printer
connector
Mains
on/off
switch
IEC
mains
socket
Fuse