MEGUIAR'S D300 - Manual (Page 7)

D300, DA Microfiber Correction Compound (21-49D): D30001, D30016, D30032
__________________________________________________________________________________________
Page: 7 of 18
Vapour density No data available.
Decomposition temperature No data available.
Viscosity 28 Pa-s - 35 Pa-s
Density 1.18 g/cm3
9.2. Other information
Volatile organic compounds (VOC) 11.00 % weight
VOC less H2O & exempt solvents 572.47 g/l
SECTION 10: Stability and reactivity
10.1 Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section
10.2 Chemical stability
Stable.
10.3 Possibility of hazardous reactions
Hazardous polymerisation will not occur.
10.4 Conditions to avoid
Temperatures above the boiling point.
10.5 Incompatible materials
Strong acids.
Strong bases.
Strong oxidising agents.
10.6 Hazardous decomposition products
Substance Condition
None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labelling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1 Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation
Respiratory tract irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.