MEGUIAR'S M87 - Manual (Page 7)

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711
__________________________________________________________________________________________
Page: 7 of 13
Partition coefficient: n-octanol/water No data available.
Evaporation rate No data available.
Vapour density No data available.
Decomposition temperature No data available.
Viscosity >=0.1 Pa-s
Density 0.82 g/cm3
9.2. Other information
Volatile organic compounds (VOC) 73.90 % weight
VOC less H2O & exempt solvents 605.98 g/l
SECTION 10: Stability and reactivity
10.1 Reactivity
This material is considered to be non reactive under normal use conditions
10.2 Chemical stability
Stable.
10.3 Possibility of hazardous reactions
Hazardous polymerisation will not occur.
10.4 Conditions to avoid
Heat.
Sparks and/or flames.
10.5 Incompatible materials
Strong acids.
Strong bases.
Strong oxidising agents.
10.6 Hazardous decomposition products
Substance Condition
None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not agree with the EU material classification in Section 2 and/or the ingredient
classifications in Section 3 if specific ingredient classifications are mandated by a competent authority. In addition,
statements and data presented in Section 11 are based on UN GHS calculation rules and classifications derived from
3M assessments.
11.1 Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation
May be harmful if inhaled. Respiratory tract irritation: Signs/symptoms may include cough, sneezing, nasal discharge,
headache, hoarseness, and nose and throat pain. May cause target organ effects after inhalation.