MEGUIAR'S MV80 - Manual (Page 3)

MV80 - Velocity Speed Cut Mold Compound
Do not induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. If large quantities of this material are swallowed, call a
physician immediately.
Skin Contact
In case of contact, immediately flush eyes with a copious amount of water for at least 15
minutes. Obtain medical attention immediately.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing
and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Obtain
medical attention.
4.
First aid measures
If inhaled, remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give
artificial respiration. Obtain medical attention.
Ingestion
Inhalation
Eye contact
:
:
:
:
First aid measures
See Section 11 for more detailed information on health effects and symptoms.
Fire-fighting measures 5.
Not available.
Hazardous thermal
decomposition products
Special exposure hazards
These products are carbon oxides (CO, CO
2
). Some metallic oxides.
No specific hazard.
Fire-fighters should wear self-contained positive pressure breathing apparatus (SCBA) and full
turnout gear. Special protective equipment for
fire-fighters
In case of fire, use water spray (fog), foam, dry chemical, or CO
2
. Extinguishing media :
:
:
:
NFPA
2
0 0
Health
Flammability Reactivity
Environmental precautions and
cleanup methods
Personal Precautions
If emergency personnel are unavailable, contain spilled material. For small spills add
absorbent (soil may be used in the absence of other suitable materials) scoop up material and
place in a sealed, liquid-proof container for disposal. For large spills dike spilled material or
otherwise contain material to ensure runoff does not reach a waterway. Place spilled material
in an appropriate container for disposal.
6. Accidental release measures
:
Note: See section 8 for personal protective equipment and section 13 for waste disposal.
: Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable
protective equipment (Section 8). Follow all fire fighting procedures (Section 5).
Minimize contact of spilled material with soils to prevent runoff to surface waterways. See
Section 13 for Waste Disposal Information.
Handling
Handling and storage
Storage
7.
Avoid contact with eyes. Wash thoroughly after handling.
Packaging materials
Use original container.
Keep container tightly closed. Keep container in a cool, well-ventilated area.
:
:
:
Recommended
Ingredient Name Occupational Exposure Limits
Crystalline Silica ACGIH TLV (United States, 2003). :
TWA: 0.1 mg/m
3 8 hour(s).
Isoparaffinic hydrocarbon ACGIH TLV (United States).
TWA: 5 mg/m
3 8 hour(s). Form: Mist
TWA: 200 mg/m 3 8 hour(s).
8. Exposure controls/personal protection
Europe / Italy
Date of issue : Page: 3/7 March 31, 2004.