MEGUIAR'S MV84 User Manual
Page 7

MV84, Velocity Liquid Mold Release (XP4-57C): MV8401
__________________________________________________________________________________________
Page: 7 of 17
results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the
substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective
clothing.
Gloves made from the following material(s) are recommended: Butyl rubber.
Fluoroelastomer
Polymer laminate
Respiratory protection
Wear respiratory protection if ventilation is inadequate to prevent overexposure. An exposure assessment may be needed to
decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program.
Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours and particulates
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
Liquid.
Appearance/Odour
Crystal clear liquid; Hydrocarbon odour
Odour threshold
No data available.
pH
Not applicable.
Boiling point/boiling range
76.7 ºC
Melting point
Not applicable.
Flammability (solid, gas)
Not applicable.
Explosive properties
Not classified
Oxidising properties
Not classified
Flash point
40.6 ºC [Test Method:Pensky-Martens Closed Cup]
[Details:D93-90]
Autoignition temperature
No data available.
Flammable Limits(LEL)
No data available.
Flammable Limits(UEL)
No data available.
Vapour pressure
No data available.
Relative density
0.71 - 0.81 [Ref Std:WATER=1]
Water solubility
Nil
Solubility- non-water
No data available.
Partition coefficient: n-octanol/water
No data available.
Evaporation rate
No data available.
Vapour density
No data available.
Decomposition temperature
No data available.
Viscosity
0.001 Pa-s
Density
0.71 - 0.81 g/cm3
9.2. Other information
Volatile organic compounds (VOC)
96.39 % weight
VOC less H2O & exempt solvents
732.57 g/l
SECTION 10: Stability and reactivity
10.1 Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section
10.2 Chemical stability