Myron L T6/PH - Manual (Page 2)

DESCRIPTION
This manual describes your Myron L pDS meter, tells you how to
use it, and how to keep it working accurately for many years.
Myron L pDS Meters are compact, light-weight, self-contained
conductivity/pH meters. They contain a built-in sample cell with a
replaceable pH sensor. Models T2/pH and T6/pH convert conductivity
values directly to Total Dissolved Solids (TDS), and have dials
calibrated in parts per million and in pH units. They will quickly
determine the TDS and pH of almost any solution.
Both are 3.4" x 4.5" x 4.0" (85 x 129 x 126mm) and weigh less
than one pound (.45 kg). pDS Meters are completely self-contained.
The built-in cell is automatically temperature compensated from 50
°
to 160
°
F (10
°
to 71
°
C). They are powered by a 9 volt transistor battery
good for at least 2000 tests, or one year shelf life.
MODEL PARTS PER MILLION (PPM) pH RANGE
RANGES
T2/pH 0-50, 0-500, 0-5000 ppm TDS 2-12 pH
T6/pH 0-5000 ppm TDS 2-12 pH
ACCURACY (Both Models)
TDS:
±
2% of full scale (ppm NaCI standard only); Ground water
(442 standard) values are approximate because of varying
sample TDS compositions (see ACCESSORIES).
pH:
±
0.2 pH units
REPEATABILITY: (Both Models)
±
1%
By using an RE-10 Range Extender (see ACCESSORIES), the
maximum TDS range of each meter may be increased ten times.
The pictures in this manual show the major operating parts of
your Myron L pDS Meter. Handle your pDS Meter and identify these
parts to become familiar with it.