KEMP ProLiant DL - Manual (Page 9)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 9 / 16
LoadMaster for HP ProLiant
Installation Guide
Figure 2-4: IP address
The LoadMaster should obtain an IP address via DHCP, please note this value.
If the LoadMaster does not obtain an IP address via DHCP then the LoadMaster must be manually
configured using the Keyboard Video Mouse (KVM) console once the license key has been obtained.
Please refer to Section 3 for further information regarding manually configuring the LoadMaster.
After a successful boot, a login prompt will appear. Log in using the LoadMaster user credentials. The
default login details are as follows:

lb100 login: bal

password: 1fourall
2.2 Licensing and Configuration
The LoadMaster must now be configured to operate within the network configuration.
In an internet browser, enter the LoadMaster IP address that was obtained via DHCP,
like in the example in Figure 2-4..
Ensure to enter https:// before the IP address.
A warning may appear regarding website security certificates. Please click the
continue/ignore option.
The LoadMaster End User License Agreement screen appears.
Please read the license agreement and, if willing to accept the conditions therein, click
on the Agree button to proceed.