3250cl instruction rev 3 pg 9, Troubleshooting symptom solution, Warranty – Rhin-O-Tuff 3250CL User Manual
Page 10
Troubleshooting
Symptom
Solution
Coil will not spin
into book
•Align pages of book such that the holes
in the pages are all evenly aligned
•Use book former to shape book to the
contour of the coil
Pliers will not crimp
coil
•Make sure that the RED dot is pointing
up, to the ceiling and the right hand side
of the book is being cut/crimped
•Hold pliers horizontally
•Grasp coil being cut firmly between
thumb and forefinger will operating pliers
Warranty
The 3250CL coil binding system is covered by a 3 Year Limited Warranty against defects in materials
and workmanship, and is limited to the replacement of the defective system or the repair of the defective
system at the manufacturing facility. Modifications or intentional abuse of the system will not be covered
under this warranty. The punching die assembly will be covered for 1 year to be free of manufacture defects.
**25 sheet punching capacity is based upon 25 sheets of 20lb copy paper, punching 44 holes on an 11” paper edge.
9
To obtain warranty repair of 3250CL coil binding system:
1. Obtain serial number of machine from decal on back of machine as shown below.
2. Call 1-800-390-5782 to arrange for a Return Merchandise Authorization number. Please have the symptom(s)
of the machine failure, the machine serial number, as well as shipping and contact information at the time of the call.
9/9/2008 3250CL Rev. 3
Performance Design LLC
Boise, ID.
Web: www.rhin-o-tuff.com
E-mail: [email protected]