Varad PL118 - Manual

Installation Guide
1
Contents
PL112
PL118
Thank you for purchasing Illuminaire’s home theater lighting system.
You can use this guide to:
• Get familiar with your home theater lighting system.
• Installation.
• Operation.
LED light bars Light bar controller
Clamps/Tape/Tie straps
Power supply
2
Installation
• The LED light bars should be installed 1”-2” from the edge
of the television and centered vertically (diagram 1). Use the
supplied tape, clamps and tie straps (diagram 2) for mounting.
• The light bar controller can be mounted to the rear of the
television or placed in any other suitable location.
• Plug the LED light bars into the 2 ports on the light bar controller.
• Connect the power supply to the light bar controller.
All excess cable should be bundled together for a clean appearance.
Proceed to section 3 for operation
1“-2”
Diagram 1
Back view of television
Diagram 2