Fault finding, Dry mode, Wet mode – NaceCare Solutions WV800 User Manual
Page 12: Data, This machine can be used for wet and dry pick up, Motor airflo suction cleaning range class

Motor
AirFlo
Suction
Cleaning
Range
Class
CVC 370
WV 370
WV 470
1200W
1200W
1200W
40 L/sec
40 L/sec
40 L/sec
2500 mm
2500 mm
2500 mm
28.8m
28.8m
28.8m
II
Capacity
Dry
Capacity
Wet
Size
Weight
Sound
Pressure
CVC 370
WV 370
WV 470
15 Ltrs
15 Ltrs
27 Ltrs
9 Ltrs
9 Ltrs
20 Ltrs
355x355x510
355x355x510
355x355x710
7.1 Kgs
7.1 Kgs
9.6 Kgs
73-77 dB
(IEC 60704-2-1)
Uncertianty: 0.2 dB (A)
Fault Finding
This machine can be used for wet and dry pick up.
Dry Mode
If the vacuum cleaner stops working switch off and remove the plug from the wall before
investigating were the fault lies.
If the vacuum cleaner will not pick up any debris from the surface, switch off and remove the plug from the wall,
inspect the floor tool, wands and hose for blockages, if no blockages are found, the dust bag may be full if the
dust bag is not full the filter may be blocked.
Wet Mode
If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the
fault lies.
If the vacuum cleaner has a blockage and will not pick up liquid, switch off and remove the plug from the wall,
has the float valve operated, this will shut off the suction and the pitch of the vacuum motor will change Remove
the power head and empty the liquid out of the container, if the container is empty, check that the floor tool
wands and hose are not blocked.
After use always inspect the machine for damage.
Data