NaceCare Solutions PVR390 - Manual (Page 11)

11
DO:
-Keep your machine clean including hoses and tubes.
-Change dust bag frequently.
-Keep filters clean.
-Keep diffuser filter (where fitted) clean.
-Use filter bags, they will enhance performance and help keep machine clean.
-Use a Numatic Original filter bag under fine dust conditions.
-Keep hoses and tubes clear.
-Replace any worn or damaged parts immediately.
-Only use the socket outlet on the machine for purposes specified in the instructions.
-Only use the brushes provided with the machine. The use of other brushes may
impair safety.
-Regularly examine the power cord. If damage is found such as cracking or ageing the
power cord must be replaced by a qualified person.
-Only replace the power cord with the correct Numatic approved replacement part.
DON’T:
-Unreel the cable with one pull or pull on the cable to unplug the machine from the
power supply.
-Use to suck up hot ashes or lighted cigarette ends.
-Use steam cleaners or pressure washers to clean the machine or use in the rain.
-Immerse in water for cleaning.
-Attempt machine maintenance or cleaning unless the power supply plug has been
removed from the supply outlet.
Do not use in wet environments or to collect wet materials.
Do not place liquid in the caddy, this is a dry use machine only.
Do not place more than 2.5 Kg (MAX weight) into each caddy.
DRW-5347 PVR - PVT Range (AUTOSAVE) WIRING DIAGRAM
Do’
s and Don’ts - Schematic Diagram