NaceCare Solutions JS1500 - Manual (Page 3)

3
MAINTENANCE
After each use:
- flush hoses with clean water
- clean & dry all accessory tools
- wash and dry cleaning cloths
Occasionally:
- lightly lubricate joints and o-rings on accessory tools
After 150 hours (or as necessary):
- de-scale boiler (see below)
Turn off machine and allow to cool completely, unscrew valve cap (1) and add 1 litre of
deliming solution with 1 litre of water. Allow to stand for at least 8 hours. Place a container
under the machine below the drain plug on the bottom of the machine. Remove drain plug and
allow solution to drain out. Rinse by replacing plug and filling unit with fresh water. Drain
again. Tighten drain plug. Machine is ready to use again.
TECHNICAL SPECIFICATIONS
Body Stainless Steel
Boiler Stainless Steel AISI 304
Operating Pressure 60 psi
Power Supply 115V, 60Hz
Boiler Output (max.) 1,500 W
Boiler Volume
4 quarts
Power Cord 8 ft
WARNINGS
Do not detach any accessories while producing steam.
This machine must only be used with a properly grounded outlet.
Servicing
Any servicing required should be carried out by qualified personnel.
Always use the appropriate parts when making any repairs. Failure to do so may compromise
the safety of the product.
Always use genuine NACE SOLUTIONS parts for any repairs required.
1205 Britannia Road E., Mississauga, Ontario, Canada L4W 1C7
Tel.:(905) 795-0122 Fax:(905) 795-0038
Toll Free Tel: 1-800-387-3210
Toll Free Fax: 1-800-709-2896