Decolav 1766 - Manual (Page 2)

PLEASE CONTACT 1-866-332-6528 FOR FURTHER ASSISTANCE
DECOLAV.COM
© DECO LAV, INC. 2014
2
ASSEMBLY INSTRUCTIONS
• Make sure not to crimp or pinch wire for safe connections. Plug in the
power cord (please check local electrical codes for the height of the outlet,
as each area may be different. We recommend using a GFCI outlet.)
CONNECTING THE POWER 2
• Raise the Mirror above the anchor and lower Mirror into
• position. See figure 2
• Slight side to side adjustments can be made by lifting up slightly on the
mirror or sliding the mirror left and right
MOUNT MIRROR TO FINISHED WALL 3
• Carefully remove your new mirror from carton and place safely aside
• Determine at what height the wall cleat is to be hung. Mark with pencil
• Using a level, make a horizontal line where the mirror is to be hung that is
parallel to the floor
• mark for the drywall anchor holes (Note: if a hole will hit a wall stud use a
screw instead of a drywall anchor)
• Drill holes for the drywall anchors and install drywall anchors. See figure 1
SETTING UP YOUR NEW WALL MOUNTED
MIRROR 1
KATESTON MIRROR WITH LED LIGHTING
item #1766-SSA
NOTE: Two individuals are recommended for installation of this
product.
Figure 1
Figure 2
23 7/32"
590
G
DETAIL G
SCALE 1 : 3
Wall hole
Wall
anchor Wall
screw
H
DETAIL H
SCALE 1 : 2
Hook on the mirror body
DETAIL H
SCALE 1 : 2
Hook on the mirror body
H