Decolav 1725 - Manual (Page 2)

Please contact 1-866-332-6528 for further assistance
DecolaV.com
© Deco laV, inc. 2014
2
assembly instructions
• remove all glass shelves from its protective packaging
• rest shelves on one side of the open cabinet and slowly lower glass onto
opposing sides shelf rests. ( repeat on remaining glass shelves)
installing and adjusting the removable
shelves 3
• raise Wall mounted mirrored cabinet above Wall cleat and lower mirror
cleat into position. see figure 2
• Gently push down on the top of the Wall mounted mirror to ensure
the cabinet cleat and wall cleat are fully seated into position. the Wall
mounted mirror should be fully against the wall when cleats are fully
seated
• slight side to side adjustments can be made by lifting up slightly on the
cabinet or sliding the cabinet left and right
mount mirrored cabinet to finished wall 2
• carefully remove your new mirror from carton and place safely aside
• Determine at what height the wall cleat will be hung. mark with pencil
• using a level, make a horizontal line where the mirror is to be hung which is
parallel to the floor
• Place the Wall cleat on this line in the desired location and mark for the
drywall anchor holes (note: if a hole will hit a wall stud use a screw instead of
a drywall anchor)
• Drill holes for the drywall anchors and install drywall anchors. see figure 1
setting uP your new wall mounted mirror cabinet 1
Finished Wall
Finished Wall
Mirror Assembly
Wall Screw
Anchor
Wall Cleat
Wall Hole
Wall Cleat
Finished Wall
Tempered Glass Shelf Shelf Pin
bennett wall mounted mirrored cabinet
item #1725-GaW / 1725-raW / 1725-WeG
note: two individuals are recommended for installation of this
product.
figure 1
figure 2