Crane Composites Sanigrid Fiberglass Ceiling Grid Class A - Manual (Page 2)

SANIGRID II PART NUMBERS
Wall Anchor Cross Tee #C-20
Wall anchors are available to secure the main runner and cross tees to the wall
angle. Also available is industrial double-faced tape that can be used in lieu of
screws to attach the wall anchor.
Main Tee Splice #C-21
The Main Tee Splice is used to securely join two main runners.
Ceiling Panel Hold Down Clip
#C-24 for panels 3/32" (2.4mm) - 9/32" (7.1mm)
#C-25 for panels 9/32" (7.1mm) - 1/2" (12.7mm)
Hold down clips are intended only to hold ceiling panels in position. They will not
prevent panel warping under severe environmental conditions.
Rivet
#R52503 3/4" (19mm) #R52501 1" (25.4mm)
#R52502 1½" (38mm) #R52507 2" (50.8mm)
Not included with standard installation kit, must be purchased separately.
Wall Angle #SG203
1" x 1" (25.4 mm x 25.4 mm) wall angles come cut in standard 12' (3.7 m) lengths to
fasten directly to the wall.
Main Runner #SG201
Main runners come in 12' 1½" (3.7 m) lengths.
Notches for cross tee attachments and hanger wires are 6-1/16" (154 mm) on center.
Cross Tee
#SG202 - 48½" (1232 mm) pre-notched to snap into the main runners.
Cross Tee 2’ - use with main runner
#SG223 - 24½” (622 mm) to mate with the main runners.
Cross Tee 2’ - use with 4’ cross tees
#SG222 - 24⅛” (613 mm) nests between 4' cross tees.
PART #
IDENTIFIER
COLOR LENGTH DESCRIPTION
Sold in Full
Box/Bag
Quantities
R51512
White Only
12 ft. SG201 - Main Tee 20
R51513 4 ft. SG202 - 4 ft. Cross Tee* 30
R51514 2 ft. SG222 - 2 ft. Cross Tee 30
R51522* 2 ft. SG223 - 2 ft. Cross Tee (Main Tee Connection)* 30
R51519 12 ft. SG203 -Wall Angle 20
R51516
Not
Applicable
C-20 -Wall Anchor 100
R51515 C-21 - Connector Clip 100
R51517 C24 - Hold-Down Clip panels 3/32” to 9/32” 100
R51518 C-25 - Hold-Down Clip for panels 9/32” to 1/2” 100
R51521 T-30 Double Face Tape to Attach Wall Anchor 100 ft. Roll
Reference Sanigrid Calculator at www.cranecomposites.com/industries/bp/ceilinggrid_confi g.html
*Cross Tee SG223 is designed to interlock with the main tee and is used only where main tees are spaced 2' on center. THESE TEES ARE A NON STOCKED
SPECIAL ORDER ITEM WITH A 4 WEEK LEAD TIME.
**Non-standard oversize ceiling panels (23.75" x 48" and 23.75" x 24" - use with 2ft cross tee SG223) are available to prevent ceiling panel from shifting. These
panels will not fi t standard metal grid systems.
Part Names and Numbers
$OORYHUOHQJWKGLPHQVLRQVKDYHDWROHUDQFHRIƍƍ
Wall Anchor
Cross Tee
C-20
Main Runner
Connection Clip
C-21
Tape
T-30
Ceiling Panel
Hold Down Clip
Ceiling Panel Thickness
C-24 | ƍƍWRƍƍ
C-25 | ƍƍWRƍƍ
Fits into
Main Runner
Fits into
ƍƍ&URVV7HH
Wall Angle
SG203
Main Runner
SG201 SG202
&URVV7HHƍ
SG223 SG222
&URVV7HHƍ &URVV7HHƍ H ƍ
Cross Tee
Connection Notch
Hanger Wire
Hole
ƍƍ2YHUDOO/HQJWK
ƍƍ2YHUDOO/HQJWK
ƍƍ2YHUDOO/HQJWK
ƍƍ2YHUDOO/HQJWK ƍƍ2YHUDOO/HQJWK
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
ƍƍ
Rivet
XVHZLWKPDLQUXQQHU XVHZLWK¶FURVVWHH