Foreword, Installation manual for ix panel ta100 – Beijer Electronics iX Panel TA100 EN User Manual

Page 2

Foreword

Installation manual for iX Panel TA100

Foreword

All iX Panels are developed to satisfy the demands of human-machine
communication. Built-in functions such as displaying and controlling text,
dynamic indication, time channels, alarm and recipe handling are included.
The operator panel works primarily in an object-oriented way, making it easy to
understand and use. Conﬁguration is carried out on a PC using the iX Developer
conﬁguration tool. The project can then be transferred and stored in the operator
panel itself.
Various types of automation equipment such PLCs, servos or drives can be
connected to the iX Panels. In this manual, the term “the controller” refers to the
connected equipment.
This manual explains how to install the operator panel. Please refer to the iX
Developer reference manual for further information.

Order no: MAEN010A

The information in this document is subject to change without notice and is provided as available at the

time of printing. Beijer Electronics AB reserves the right to change any information without updating this

publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this document.

Read the entire installation manual prior to installing and using this equipment. Only qualiﬁed personnel

may install, operate or repair this equipment. Beijer Electronics AB is not responsible for modiﬁed, altered

or renovated equipment. Because the equipment has a wide range of applications, users must acquire the

appropriate knowledge to use the equipment properly in their speciﬁc applications. Persons responsible

for the application and the equipment must themselves ensure that each application is in compliance with

all relevant requirements, standards and legislation in respect to conﬁguration and safety. Only parts and

accessories manufactured according to speciﬁcations set by Beijer Electronics AB may be used.

BEIJER ELECTRONICS AB SHALL NOT BE LIABLE TO ANYONE
FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE
INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT, WHETHER
ARISING IN TORT, CONTRACT, OR OTHERWISE. BUYER'S SOLE
REMEDY SHALL BE THE REPAIR, REPLACEMENT, OR REFUND
OF PURCHASE PRICE, AND THE CHOICE OF THE APPLICABLE
REMEDY SHALL BE AT THE SOLE DISCRETION OF BEIJER
ELECTRONICS AB .

Beijer Electronics, MAEN010A