Beijer Electronics DT150 EN - Manual (Page 10)

Installation
Beijer Electronics, MAEN844D 9
4. Connect the cables in the specified order.
5. Carefully remove the laminated film over the monitor display, to avoid
static electricity that could damage the monitor.
Caution
Use only shielded signal cables.
Separate high voltage cables from signal and supply cables.
Caution:
The monitor must be brought to ambient temperature before it is
started up. If condensation forms, ensure that the monitor is dry be-
fore connecting it to the power outlet.
A
B
Monitor
115/230 V AC
Industrial PC
12 V DC
VGA/DVI
AC/DC Adaptor
Ground connected
power cord
A B
- +