Beijer Electronics iX T10A EN - Manual (Page 12)

Technical Data
3 Technical Data
Parameter iX T10A
Front panel, W × H × D 280 Ч 228 Ч 7 mm
Cut out dimensions,
W × H
262 × 209 mm
Mounting depth 44 mm (144 mm including clearance)
Standalone mounting VESA 75 × 75
Note: Maximum screw length for VESA mounting is 4 mm.
Usage of longer screws may lead to damage.
Front panel seal IP 65
Rear panel seal IP 20
Touch screen
material Polyester on glass, resistive.
Overlay: Autoflex EBA 180L
(1) .
Touch screen
operations 1 million finger touch operations
Reverse side
material Powder-coated aluminum
Frame material Powder-coated aluminum
Weight 1.5 kg
Serial port for
COM1 RS232 and
COM2 RS422/RS485 9-pin D-sub contact with RS232 RTS/CTS, chassis-mounted
female with standard locking screws 4-40 UNC
Serial port for
COM3 RS232 and
COM4 RS422/RS485 9-pin D-sub contact with RS232 RTS/CTS, chassis-mounted
female with standard locking screws 4-40 UNC
Ethernet 1 × 10 Base-T / 100 Base-T (shielded RJ 45)
USB 1 × USB Host 2.0, max output current 200 mA
Processor 400 MHz ARM9
External storage
media 1 × SD card (optional). Only compatible with the standard SD
format with up to 2 GB storage capacity.
Flash memory
(application
memory) 128 MB SSD (NAND Flash)
Memory RAM 128 MB (DDR2)
LED 1 × blue/red software programmable
Real time clock Yes (on chip)
Battery (2) Lithium battery type BR 2032, soldered
or rechargeable battery
(2) (Seiko Instruments Part No.
MS920-SE or similar), soldered
Power consumption
at rated voltage 9.6 W
Fuse Internal DC fuse, 2.0 AT, 5 × 20 mm
Beijer Electronics, MAEN017F 12