Ultra space saver single – American Bicycle Security Company Ultra Space Saver Single User Manual
Page 4
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
*Tools Needed for Wall Mount Installation
9/16” Wrench/Socket
3/8” Masonry Drill Bit
Tape Measure
Drill (Hammer drill recommended)
Hammer
1. Place rack against wall. Mark holes and lower rack.
2. Drill holes 2” deep with ½” diameter drill bit. If installing
more than one Ultra Space Saver Single, mark holes for
each rack individually as there may be slight differences in
the placement of holes from rack to rack.
3. Place rack back into position against wall and tap anchors
through holes in the rack and into the wall.
4. Tighten anchors
Installation Steps:
Ultra Space Saver Single
Installation
Installation Steps:
- 301 (4 pages)
- 301P (4 pages)
- 301V (4 pages)
- 301W (4 pages)
- 301WL (4 pages)
- 302 (4 pages)
- 351 (2 pages)
- 352 (2 pages)
- 352SS (2 pages)
- Arc Rack (4 pages)
- Bike Bike Rack (3 pages)
- Bike File Rack (8 pages)
- Bike Haven (6 pages)
- Bike Hitch (4 pages)
- Bollard Hitch (2 pages)
- Broadway (4 pages)
- Campus Rack (4 pages)
- Compack Rack (2 pages)
- Cycle Stall Basic (4 pages)
- Cycle Stall Elite (4 pages)
- Dero Decker (5 pages)
- Dero Duplex (5 pages)
- Downtown (5 pages)
- Event Rack (2 pages)
- Fix it Rack (5 pages)
- Helix Rack (2 pages)
- Hi Roller (4 pages)
- Hoop Rack (5 pages)
- Hoop Rack Heavy Duty (5 pages)
- Kolo (8 pages)
- Meter Hitch (2 pages)
- Pocket Shelter (10 pages)
- Recycle Rack (4 pages)
- Rolling Rack (4 pages)
- Rolling Rack Mini (2 pages)
- Round Rack (4 pages)
- Swerve rack (5 pages)
- Track Rack (8 pages)
- Ultra Space Saver (6 pages)
- Viper Rack (2 pages)
- Wall Rack (3 pages)
- BA Series (1 page)
- SR Series (1 page)
- DR Series (1 page)