Kolo shelter – American Bicycle Security Company Kolo User Manual
Page 6
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Kolo Shelter
Installation Instructions
5. If building a modular system of Kolo
shelters, continue to place and fasten
Uprights, Center Weldments, and Dero
Decker Beams/Campus Racks.
6. Fully tighten all above bolts and nuts.
Then tighten Simpson Torq-Cut anchor
nuts to 230 ft-lbs.
7. Apply foam rubber tape to the Rafter without covering .30” holes. Working from one
end of the shelter to the other, lift a Rafter into place using a lifting strap. Secure
the lifting strap at the rafter’s center of gravity which is indicated by a notch at the
apex of the Rafter cut-out. Once the Rafter is in place, fasten the rafter to the
Upright with (2) 5/8x1.5” bolts, (4) lock washers, and (2) nuts using the two upper-
most holes. Continue to fasten all remaining Rafters with the above method.
8. Fully secure the Rafters with (6) 5/8x7.5” bolts, (12)
lock washers, and (6) nuts for each pair of Rafters