Fixit, American bicycle security company – American Bicycle Security Company Fixit User Manual
Page 2
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Fixit
Product
Fixit
Capacity
1 Bike – Not a lockable device
Materials
Main body: 6.308 x .154” tube
Bike Hanger: 1.5” sch. 40 pipe, ¼” plate
Foot: 10” dia. x .25” plate
Tool tethers: 5/32” stainless steel cable
Manual air pump
Hand tools:
Philips and flat head screwdrivers
2.5, 3, 4, 5, 6, 8mm Allen wrenches
Headset wrench
Pedal wrench
8, 9, 10, 11mm box wrenches
Tire levers (2)
Finishes
An after fabrication hot dipped galvanized finish is our standard
option.
250 TGIC powder coat colors, thermoplastic coating, PVC dip,
and stainless steel finishes are also available as alternate
options.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
Installation
Methods
Foot Mount has 10” diameter x.25” foot with four anchors
per foot.
Space Use
& Setbacks
Wall Setbacks:
The back of the Fixit should be 12” from wall. Both sides
of the Fixit should be at least 45” from walls or other
obstructions. No part of the Fixit should protrude into a
walkway, bike lane, or common area.
Street Setbacks:
For Fixits running parallel to the street, a 60” setback is
recommended. For Fixits installed perpendicular to the
street, a 60” setback is the minimum.
Fixit with Air Kit 2
Fixit with Air Kit 3