Cycle stall elite, American bicycle security company – American Bicycle Security Company Cycle Stall Elite User Manual
Page 2
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Cycle Stall Elite
Product
Cycle Stall Elite
Capacity
14 Bikes
Materials
Main body 2” x 1/8” square tube
Locking bars 1.5” x 1/8” square tube
Finishes
An after fabrication hot dipped galvanized finish is our standard
option.
250 TGIC powder coat colors, thermoplastic coating, PVC dip,
and stainless steel finishes are also available as alternate
options.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
Stainless Steel: 304 grade stainless steel material finished
in either a high polished shine or a satin finish.
Installation
Methods
Surface Mount has five 2” wide feet which should be
anchored to the ground with supplied anchors
Space Use
& Setbacks
The Cycle Stall should be centered length-wise in an on street
parking space. The open side of the Cycle Stall
should be facing the curb. For width-wise placement, see
local guidelines.