Troubleshooting – Wittco 200-2R-BI-C-NA User Manual
Page 9

NA DRAWER WARMER
F-41215 (02-14)
8
TROUBLESHOOTING
SYMPTOMS
POSSIBLE CAUSES
REMEDY
Warmer not operating
Warmer not connected to 
power source. 
Connect cabinet to power 
source.
No power
Check Circuit Breaker and/or 
check GFCI switch on outlet.
GFCI or Ground Fault 
Circuit Indicator tripped
Moisture problem.
Dry moisture problem.
Shorted element
Contact Authorized Service 
Provider.
Pinched/damaged wire.
Contact Authorized Service 
Provider.
Damaged power cord.
Contact Authorized Service 
Provider.
Warmer is connected to 
power source, switch is 
turned on, but warmer 
not heating
Defective: heating element, 
thermostat, etc.
Contact Authorized Service 
Provider.
 
 
SERVICE & PARTS INFORMATION
To obtain Service and Parts information concerning this model, contact WITTCO 
Service Department at the address listed on the front cover of this manual or refer to our 
website: 
www.wittco.com
for a complete listing of Authorized Service and Parts depots.
Customer Service
1-800-367-8413
Technical
Service
1-866-628-0485
Service
Parts 1-866-628-0485
Malibu
Service
0161-874-5400
 
 
When calling for service, have the model number and serial number available. 
 
 
