Wittco 200-2R-BI-C-NA - Manual (Page 6)

NA DRAWER WARMER F-41215 (02-14)
5
OPERATION
CONTROLS
The Warmer and its
parts are hot. Be very careful when
operating, cleaning, or servicing the
warmer.
HEATING INDICATOR LIGHT:
The Drawer Warmer Control Panel
contains a Heating Indicator Light. The
Heating Indicator Light lights up when
the heating elements are engaged.
When the drawer warmer reaches
factory set temperature, this light will go
out.
(Fig.2)
LIGHTED SWITCH:
The lighted switch energizes the unit.
(Fig. 2)
Fig. 2
.
OPERATING INSTRUCTIONS
The Warmer and its
parts are hot. Be very careful when
operating, cleaning, or servicing the
warmer.
Once the drawer warmer has been
connected to the appropriate power
source, the warmer is ready for
operation.
The warmer has two drawers. Each
drawer has a Heating Indicator light and
a lighted switch.
Push the Lighted Switch to the ON
position. This will cause the heating
element to start heating. When this
occurs, the Heating Indicator Light will
illuminate. This light will stay on as long
as the heating element is engaged.
Once the factory set temperature is
achieved, the heating element will begin
to cycle. During this period, the
Heating Indicator Light will turn on and
off as the heating elements cycle
.
The operator should always monitor the food product to insure that it remains at
proper temperatures.