Westwood Design Jonesport Toddler Guard Rail Kit - Manual (Page 6)

Mattress Height Adjustment
The toddler bed can only be used with the mattress support in its lowest position.
To adjust the mattress height, follow these steps:
A. Carefully tip the crib onto its back.
B. Undo the four wing nuts holding the support arms to the spring and remove
the screws.
C. Lower the spring to the desired setting and align the holes.
D. Insert the screws and tighten the wing nuts.
Highest
Lowest
Middle
Wing Nut
Support Arm
635 N. Billy Mitchell Rd., Ste. B
Salt Lake City, UT 84116
Phone: 1-908-719-4707
[email protected]
December 1, 2010
W
westwood design