Step 3, Required hardware – Westwood Design Jonesport Toddler Guard Rail Kit User Manual

Page 5

Text mode
Original mode

Step 3

A. From the hardware pack included with the crib, locate allen bolts (P) and cap nuts (Q).
B. Insert the allen bolt through the top hole in the corner post, and thread it into the cap nut
as shown. Tighten securely using the allen wrench.
C. Repeat on the other side.

Required Hardware

2 x Allen Bolt, 1-1/8” Long (P)

Allen Wrench

2 x Cap Nut

(Q)

Allen Bolt (P)

Cap Nut (Q)