TurboChef Technologies High h Conveyor 2620 EN - Manual (Page 18)

10 STANDARD OVEN OPERATION
Oven Controls
Figure 12.
1. Display
The display shows current oven operation and/or
user programming information.
2. Soft Keys
Six soft keys are on the oven controls, three on the
left (L1, L2, L3, where L1 = top) and three on the
right (R1, R2, R3, where R1 = top). Use the soft
keys to select the option/command that is adjacent
to it.
3. Up and Down Keys
When the oven is in the oven off mode, use the
up key to access the config mode (page 15). Use
the down key to access cooking profiles 5-8.
Also, press the up and down keys to adjust various
oven settings (see pages 13-17).
Oven Controls
Figure 19
4. Back/Off Key
Depending on the mode the oven is in, the back/
off key will return the oven to the previous screen or
turn the oven off (page 11).
5. Idle Key
The idle key activates the idle mode (page 12).
6. Emergency Stop Key
The emergency stop key shuts down the conveyor
and heaters and returns the oven to the oven off
mode (page 11).
NOTE: Depending on the temperature within the
oven, the cooling fans will remain on to prevent
damage to critical oven components.
CAUTION: DO NOT use the emergency stop
key as a general on/off switch. Doing so can
damage the oven and shorten its life span.
IDLE
BACK
OFF
E
M
ER
GEN
C
Y
S T O P
High h Conveyor
by TurboChef TM
2 2
3
4
5
6
1
Figure 12: Oven Controls