Silver King SKRB48 User Manual

Page 2

TECHNICAL MANUAL

SILVER KING MODEL SKRB48 REFRIGERATOR

Thank you for purchasing Silver King food service equipment. Our goal is to provide our customers

with the most reliable equipment in the industry today. Please read this manual and the accompany-

ing warranty information before operating your new Silver King unit. Be sure to complete and mail the

warranty card within 10 days of purchase to validate your warranty.

INSPECT FOR DAMAGE AND UNCRATE

Upon delivery of your new Silver King unit, uncrate at once to examine and test for possible damage

following the instructions printed on the exterior of the container. Report any damages to the carrier

responsible for transportation and promptly present a claim for any evidence of mishandling.

INSTALLATION

The stainless steel exterior of the cabinet has been protected by a plastic covering during manufac-

turing and shipping. This covering can be readily stripped before installation. After removing this

covering, wash the interior and exterior surfaces using a warm, mild soapy water solution and a

sponge or soft cloth.

Location

When locating your new Silver King unit, convenience and accessibility are important considerations,

but the following installation guidelines must be observed;

* Always avoid locating the unit adjacent to an oven, heating element or hot air source which could

adversely affect the performance of the unit.

* If the unit is not on casters, it is designed to be sealed to the floor with a waterproof sealant as

required by NSF International. To do so, locate the unit in its desired location (following the installa-

tion instructions), apply a bead of sealant around the perimeter of the unit at the base and smooth out

with a finger to form a radius with the floor and the unit.

* The unit must be level.

* For proper ventilation, the bottom front of the unit must not be obstructed.

Shelves

Inside the unit you will find Shelves and a plastic bag containing Shelf Supports. The Shelf Supports

with the tang go on the rear Pilasters. This shelf system allows for easy adjustment to suit your

needs.

Electrical Connections

Be sure to check the data plate, located on the liner of the cabinet, for required voltage prior to

connecting the unit to a power source. The specifications on the data plate supersede any future

discussion.