Power Soak 37179 PS-275 Service Manual - Manual (Page 19)

13
5.8 Green Unload/Load Light
Flashing – wash period is complete, time to unload the items
from the wash tank (press the Load/Unload button to pause
the unload timer).
Solid – unload timer is paused (press the Load/Unload when
the unloading is complete to restart the timer).
(NOTE: Proper operation of the Load/Unload button according to the
flashing of the green light along with keeping the wash tank continuously
operating will extend the wash solution life. Improper use of the
Load/Unload button will shorten the wash solution life).
5.9 Deep Cleaning Mode Lights
5.9a High Wash Fluid Temperature
ON – The temperature of the cleaning solution in the wash tank has reached 120°F.
FLASHING – The fluid temperature in the wash tank is above 123°F and will be
uncomfortable to touch.
5.9b Deep Cleaning Mode Active
OFF – The Deep Cleaning Mode is not operating.
ON – The deep cleaning mode has been selected and the deep cleaning
programming is controlling the operation of the PS-275. (Note: If the sanitizer
tank is full, the sanitizer timer will continue to operate. When the sanitizer time
period is complete, the sanitizer indicator lights will operate but the “lockout” will
automatically be turned off and allow the wash tank to continue to operate. The
fluid should be drained from the sanitizer tank at this time. Draining the sanitizer
tank will turn off the sanitizer tank lights.)